Welcome to Phil Indo Tech Naga Corporation

Products

CU/XLPE/IS-OS/PVC

Symbol : CU/XLPE/IS-OS/PVC or P1 T1 IS-OS
Applicable Standard : Multitriad XLPE Insulated Instrumentation Cable
Flame Retardant, UV Resistant
According to BS EN 50288-7 : 2005
Voltage Designation 300 V & 500 VP1 T1 IS-OS
XLPE Insulated, Individual and Overall Collective Screen, Unarmoured
Other Specification are available on request
Application : Suitable for connecting instrument and control system for analogue or digital signal transmission.These cables shall not be connected directly to mains electricity supply or other low impedance sources and not designed to be used for power supply.Not suitable for direct buried applications.

Cable Construction:

* Conductor: Plain Annealed copper wire class 2 according to IEC 60228

* Insulation: Extruded XLPE ( Crosslinked Polyethylene)

* Individual Screen: Helically Overlapped Polyester Tape

Tinned Annealed Copper Wire 0.5 mm2 ( 20/0.18 mm )

Helically Overlapped Single Coated Aluminium Tape contacted with drain wire

Helically Overlapped Polyester Tape

* Overall Screen: Helically Overlapped Polyester Tape

Tinned Annealed Copper Wire 0.5 mm2 ( 20/0.18 mm )

Helically Overlapped Single coated Aluminium Tape contacted with drain wire

Helically Overlapped Polyester Tape

* Outer Sheath: Extruded PVC Flame Retardant ( Black or requested by customer )

 

Pair Identification :

* 1 Triad: Black, White and Red

* Multi Triad: Black, White and Red with numbering

 

Amount of halogen acid gas: Max 17% ( IEC 60754-1)

Limiting oxigen index ( LOI ): Min 30% ( IEC 60332-3 annex B )

Sunlight resistance: UL 1581 section 1200

Oil resistance: ICEA S-82-552

Flame Retardant: IEC 60332-1

Flame Propagation: IEC 60332-3 cat. A, B, C

Nominal Voltage: 300 V dan 500 V

Insul Resistance: Min. 1000 MOhm/km

Test Voltage: 300 V : 1000 V/1 min

500 V : 2000 V/1 min

Screen Resistance: Min. 1 MOhm/km

Min.Bending Radius: 6 x OD ( fixed installation )

Temperature Rating: -40° C to 70° C

Symbol : CU/XLPE/IS-OS/PVC or P1 T1 IS-OS
Applicable Standard : Multitriad XLPE Insulated Instrumentation Cable
Flame Retardant, UV Resistant
According to BS EN 50288-7 : 2005
Voltage Designation 300 V & 500 VP1 T1 IS-OS
XLPE Insulated, Individual and Overall Collective Screen, Unarmoured
Other Specification are available on request
Application : Suitable for connecting instrument and control system for analogue or digital signal transmission.These cables shall not be connected directly to mains electricity supply or other low impedance sources and not designed to be used for power supply.Not suitable for direct buried applications.

Reviews

There are no reviews yet.

Be the first to review “CU/XLPE/IS-OS/PVC”

Your email address will not be published.