Welcome to Phil Indo Tech Naga Corporation
Call Us Anytime! + (632) 8 983 9994
Get A Quote

Products

FHP

1. The heating cable shall consist of two 16 AWG nickel-plated copper bus wires, embedded in a self-regulating polymeric core. Cables shall have a temperature identification number (T-rating) of T6 (185°F or 85°C) for FHP-2 and T4 (275°F or 135°C) for FHP-3.

2. The FHP-2 heating cable shall have continuous exposure (maintain) capability up to 150°F (65°C) and intermittent exposure capability up to 185°F (85°C). The FHP-3 shall have continuous exposure (maintain) capability up to 225°F (110°C) and intermittent exposure capability up to 225°F (110°C).

3. A 30-mA residual current device or ground leakage circuit breaker must be used to provide protection from arcing or fire and to comply with nVent Thermal Management requirements, agency certifications, and national electrical codes.

4. The heating cable shall have a tinned copper braid protected by a fluoropolymer outer jacket.

For detailed product specifications, please refer to the product datasheet.

Category:

nVent RAYCHEM FHP self-regulating heat trace cables prevent frost heave by maintaining the temperature of cryogenic and low temperature storage tank foundations above freezing. RAYCHEM FHP heating cables are available for all tank sizes and construction; they can be cut to length and terminated in the field. RAYCHEM FHP heat trace cables also have an unconditional T-rating which simplifies the design process for hazardous area use.

Additional Product Information:

  1. RAYCHEM FHP heat trace cables are configured for use in nonhazardous and hazardous locations
  2. RAYCHEM FHP heat trace cables are configured for use in areas where corrosives may be present
  3. RAYCHEM FHP heat trace cables meet the requirements of international and national standards and codes

Industries Served:
Oil and Gas

Reviews

There are no reviews yet.

Be the first to review “FHP”

Your email address will not be published.

Related products