The QPSS cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914 to ensure the securing and retention of cables, without sustaining damage to the cable.
The range is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
The cleat has one M8 coach bolt fixing hole integrated into the C-Clamp allowing versatility to the installer during installation.
Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.
Please refer to how to order here to select correct cable cleat size
Quad Formation | |||
Two short circuits 300mm fixed cleat centres |
Two short circuits 600mm fixed cleat centres |
One short circuit 600mm fixed cleat centres |
Two short circuits 600mm fixed cleat centres with intermediate restraints |
0.1 sec | 0.1 sec | 1 sec | 0.1 sec |
135kA Peak | 79.5kA Peak | 62kA Peak | 100kA Peak |
61.3kA r.m.s | 37.8kA r.m.s | 29.5kA r.m.s | 47.6kA r.m.s |
Reviews
There are no reviews yet.