The SHDSS cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914.
The SHDSS cable cleat has been designed and tested for high short circuit conditions on cables held in single, parallel / flat formation, to ensure the securing and retention of cables without damage.
The Sapphire cable cleat is available for single parallel formation for diameters of 19 to 150mm in 13 sizes. The cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
The Sapphire cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Sapphire cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth
The Sapphire cable cleats come with liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cables in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.
- Third party certification to IEC 61914
- 316L stainless steel
- 19 to 150mm in 13 sizes for single / parallel formation
- Operating temperature -50°C to +60°C
- Liners are classified as Low Smoke & Fume (LSF),
- Zero Halogen (LS0H) and Phosphorus Free
- Combined single (M12) and two bolt (M10) fixing design
Patents granted: SG 11201506573Q, US 9551438
|Short Circuit Testing to IEC 61914 – Clause 9.5|
|Multicore Formation||Parallel Formation|
|One short circuit 600mm fixed cleat centres||Two short circuits 600mm fixed cleat centres||One short circuit 600mm fixed cleat centres 105mm cable centres||Two short circuits 600mm fixed cleat centres 105mm cable centres|
|0.1 sec||0.1 sec||0.1 sec||0.1 sec|
|105kA Peak||105kA Peak||110kA Peak||109kA Peak|
|50.0kA RMS||50.0kA RMS||50.0kA RMS||50.0kA RMS|
There are no reviews yet.