Aluminium Globally Approved, Hazardous (Classified) Location Cable Gland
• Simplified two part design
• Compact slim profile
• Independent sealing & armour clamping
• Simple, sequential installation process
• No disassembly required
• Equipment interface ‘O’ ring seal as standard
• Hub not required
• 360° grounding spring
• -76°F to 230°F
• Globally marked, cCSAus, IECEx, ATEX
| Design Specification | BS 6121:Part 1:1989, IEC 62444, EN 62444 |
| Enclosure Protection | IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only |
| Mechanical Classifications* | Impact = Level 8, Retention = Class D |
| ATEX Certificate | CML 18ATEX1335X |
| Code of Protection | II 2G 1D, Ex eb IIC Gb, Ex ta IIIC Da |
| Compliance Standards | EN 60079-0,7, EN 61241-0,1 |
| IECEx Certificate | IECEx CML 18.0192X |
| Code of Protection | Ex eb IIC Gb, Ex ta IIIC Da |
| Compliance Standards | IEC 60079-0,1,7,31 |
| cCSAus Certificate | 2194053 |
| CSAus Code of Protection | Class II, Division 1 and 2, Groups E, F, and G; Class III, Division 1 and 2; Encl. Type 4X. Ex e II, Class I, Zone 1, AEx e II; AEx ta IIC |
| cCSA Code of Protection | Class I, Division 2, Groups A, B, C and D; Class II, Division 1 and 2, Groups E, F, and G; Class III, Division 1 and 2; Encl. Type 4X. Ex e II; Class I, Zone 1, AEx e II; AEx ta IIC: |
| Compliance Standards | CAN/CSA-C22.2 Various Sections (See Certificate) CAN/CSA-E60079-0,7, CAN/CSA-E6124111, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11 |
| EAC Certificate (Formerly GOST R, K & B) | TC RU C-GB.AA87.B.00487 |
| UkrSEPRO | CU 19.0371X |
| CCOE / PESO (India) Certificate | P444949 |
| RETIE Approval | 03866 |
| Marine Approvals | LRS: 01/00172, DNV: TAE00000Y, ABS: 15-LD1410479-PDA, BV: 43180/A1BV |
| Ingress Protection Rating** | NEMA 4X & IP66 |
| Cable Type | Corrugated & Interlocked Metal Clad Armour (MC) or TECK90, Continuously Welded Metal Clad Armour (MCHL), ACIC-HL, ACWU90-HL, RC90-HL, RA90-HL |
| Armour Clamping | 360° Stainless Steel Grounding Spring (non-magnetic) |
| Jacket Sealing Technique | CMP Load Retention Seal |
| Sealing Area(s) | Cable Outer Jacket |
| Seal Material | CMP SOLO LSF Halogen Free Thermoset Elastomer |
| Cable Gland Material | Copper Free (<0.4%) Aluminium, Stainless Steel, Electroless Nickel Plated Brass |
Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444
** When CMP installation accessories are used. Refer to Maintaining a Seal for further information.
CERTIFICATES
PRODUCT SELECTION TABLE
Reviews
There are no reviews yet.